Voice 15 of 28

Add an emergency address

Register an emergency address and assign it to a number. This does not route every number.

Applies to Admin

An emergency address is the location you register for a number. The page is E911 Compliance. It is not in the Voice menu. Phone Numbers links to it with Configure E911 and Go to E911 setup.

Registering an address records the location for the numbers you assign. It does not mean every number routes an emergency call the same way. The change that would do that on every number is not in place. Do not tell a customer that it is.

The page shows Not fully covered until each location is dispatchable. E911 compliant and Fully covered appear only when the location is dispatchable. Otherwise you will see Location not dispatchable, E911 not confirmed, Not dispatchable, or E911 not established.

All Lines / Telco can show Cannot deliver a 911 location. An unassigned number has no customer to register against. Assign the number first.

THEO cannot place an emergency call.

Register the address#

  1. On Phone Numbers, choose Go to E911 setup or Configure E911.
    E911 Compliance, with Add Address
    E911 Compliance, with Add Address
  2. Choose Add Address. The dialog title is Register E911 Address. It says the address is validated against emergency-services databases before it can be assigned to a number.
  3. Fill Business name, First name, Last name, Street address, City, State, and the postal code. Suite / Unit is optional. A missing suite can leave the address Not dispatchable.
  4. Save the dialog, then assign that address to the number.

If the page says E911 was not enabled — this organization has no active Kari's-Law notification contact, choose Add a Kari's-Law notification contact and add one. The address form alone does not clear that refusal.

E911 Consent Required means the consent step on this page is still open. Completing it is not the same as a dispatchable location.

If it goes wrong#

  • Not fully covered stays up. A number has no address, or the address has no dispatchable location. Open the number and assign a validated address.
  • The number is unassigned. All Lines / Telco cannot register it. Assign a customer, then use that customer's Phone Numbers page.
  • A softphone says it needs an emergency address. Calls will not place or receive until an address is on file. See Use the Phone button.